Fitwood Havu Chin-up Bar, Wood/Stainless Steel

The HAVU pull-up bar is the ideal combination of purist style and a robust structure. When you hold the bar for the first time, you will immediately recognize that its source of inspiration lies deep in Scandinavian design and Nordic nature. Furthermore, a solid birch plywood frame with hard and stable stainless steel adds extra robustness and strength to the bar.

Since the HAVU pull-up bar does not need to be permanently installed on the door frame, it can be used for both functions at any time. This also means it does not damage door frames and does not get in the way when closing the door. The ends of the stainless steel bar are also covered with natural rubber sleeves to protect the door frame and adjacent walls.

The frame of the pull-up bar is made of sustainably sourced birch plywood. It contains 3 slots for the stainless steel bar, allowing the pull-up bar to be adjusted for most wall thicknesses (9-18cm). The pull-up bar is suitable for door frames that are between 60-93 cm wide.

The carved handles with a neutral grip have a diameter of 30mm for added comfort.

HAVU pull-up bars are designed and manufactured in Finland. They were developed to support an active lifestyle without compromising on design or sustainable values. Patented original design.

Only use the HAVU pull-up bar on door frames where the top door casing either lies over the vertical casings or where the frames are miter-cut. Do not use the pull-up bar on door frames where the top door casing is located between the vertical casings, unless you can be certain that the horizontal casing is securely fastened and its load-bearing capacity has been verified.

• Dimensions: Width 101cm
• Depth: 43cm
• Height: 26.5cm
• Grip diameter 30mm
• Stainless steel bar: Length 100cm, diameter 28mm
• Load capacity 130kg
• Material: Birch plywood, stainless steel, natural rubber

Frame:
You can attach the bar to the plywood frame in three different positions. This allows the pull-up bar to be mounted on almost any wall thickness. The molded plywood direct grips have a diameter of 30mm.

Bar:
The stainless steel bar is 100 centimeters long, has a diameter of 28mm, and a wall thickness of 1.5mm. The ends of the bar have rubber buffers to protect the door frame and to dampen contact points.

Safety instructions:

• The maximum user weight is 130 kilograms.
• Use the same door frame as described in the user manual.
• Do not twist the bar and do not jump onto it, so that it does not come loose from its mounting.
• Remove the bar before closing the door and after finishing your workout.

Finish: Wood-Stainless Steel